|
Metal
Treatment
All posts, panels and gates etc are galvanised to BS EN ISO
1461.An architectural quality BS6497, polyester powder
coatings follows, itself reaching a thickness of between
70–100 microns. The result is a smooth, attractive, hard
wearing and weather resistant finish.
Infill
Panels
Flow forge – vertical flat bar (25mm x 3mm) and horizontal
centre rod ø6mm form a perfect anti-climb panel. Grid size
80mm x 60mm x 25mm wide. All panels are completed with a
25mm square hollow section surround providing an easy to
grip finish. Flow forge panels are available in 1m and 2m
lengths x 1m and 2m high. Panels can also be curved for the
entrances or for the corners of the ball court.
Posts/Crossbars
ø114.3mm x 3.6mm wall thickness with fully welded domed
tops.
Triangular
Goal
Side Panels 19mm coloured polyethylene U.V. resistant.
Back Boards
19mm black and white polyethylene U.V. resistant.
Manufactured to PAS 30 requirements.
Fixings
All zinc plated bolts & nyloc nuts are protected with a
polypropylene tamper resistant cover cap providing a high
level of security. Connections are made with 5mm spacer
preventing metal on metal contact thus reducing ball impact,
noise and vibration.
Installation
To assist ease of installation and aesthetics:- All lugs on
the posts are slotted vertically to ease installation whilst
also accommodating slight variation in site levels. Lugs on
the infill panels are slotted horizontally to allow panels
to be aligned easily for aesthetic purposes. |
